DJI Wind 1 – DJI’s New Industrial Drone Leaked



DJI’s new industrial drone is the DJI Wind 1. In a recent leak, images of the Wind 1 appeared along with a few of its Specs. It is rumored to be officially announced September 2nd-7th during the IFA in Berlin. The Wind 1 name may be an internal codename. We could see it releasing under the Mxx Product Line or getting it’s own such as the Agras MG-1. Stay tuned as this page is being updated as more information becomes available.

Here’s what we know about the DJI Wind 1:

  • DJI Wind 1 – Industrial Drone that is rumored to be Rainproof (more on that later…we aren’t sold yet)
  • “Windproof “- Max Wind Resistance 12 m/s (26.84mph / 43.2 km/h)
  • Size – 740mm Diagonal from Motor to Motor
  • Dimension – 582mm (L) x 582mm (W) x 280mm (H)
  • Operating Temperature: -10°C to +50°C
  • Weight (with TB47D Battery x 2) 4040 grams
  • Weight (with TB48D Battery x2) 4225 grams
  • Max Takeoff Weight: 6000 grams
  • Max Load Weight (With TB47D x2): 1960 grams
  • Max Load Weight (With TB48D x2): 1735 grams
  • Hover Accuracy (GPS Mode)
    • Vertical: 0.5 m Horizontal: 2.5 m
  • Max Angular Velocity:
    • Pitch-axis: 300°/s
    • Yaw-axis: 150°/s
  • Max Pitch Angle 35°
  • Max Ascent Speed: 5 m/s
  • Max Descent Speed: 4 m/s
  • Max Wind Resistance: 12 m/s
  • Max Flight Speed
    • 22 m/s (in ATTI mode, no payload, no wind)
    • 17 m/s (in GPS mode, no payload, no wind)
  • Flight Times:
    • Hover Time (with TB48D Battery x2) 38 minutes
    • Hover Time (with TB48D Battery x2 + Zenmuse X3) 31 minutes
    • Hover Time (with TB48D Battery x2 + Zenmuse Z3) 31 minutes
    • Hover Time (with TB48D Battery x2 + Zenmuse XT) 31 minutes
  • Propulsion System:
  • Customized E1200 Motors

The Wind 1 is aimed at commercial customers with the rumored launch price of €9,950. This price will include two batteries and the Pelican style hardcase.



The new Wind 1 features the same integrated centrifugal cooling system as the Agras MG-1. This means that air enters the front of the drone through the black grill, where then dust and particulate matter are filtered out. Next, the air flows through the carbon fiber arms and dissipates through the motors. This allows the internal components and motors to be cooled much better than on traditional systems and extends the life of motors up to three times.




While the Shell in the first pictures may be rainproof, we habe our doubts of the above pictured configuration will be rainproof. It shows a cutout for a CAN-Bus expansion port and four mounting pins sitting on top of the body shell of the Wind 1. At the top of the image, you can see a special case with a handle on top. This most likely houses a special sensor module which can then be mounted via the quick-release mount on top of the quadcopter. This may be a compact Guidance System as found for the Matrice 100 series, or a new set altogether. The GPS Antenna is mounted internally in the body shell.


Original Source

Join over 5,000+ members who receive our newsletter and learn about the latest Drone News, receive exclusive videos, and receive tips and tricks relating to all things quadcopter.
We hate spam. You can unsubscribe at any time.

Author: Felix

Share This Post On

Submit a Comment

Your email address will not be published. Required fields are marked *